Máy đột Muratec M2044TS có nhiều chức năng hơn máy đột thông thường, tiết kiệm năng lượng và tốc độ. Nâng cao năng suất và hiểu quả kinh doanh.
Máy đột MOTORUM M2044TS
New Drive Ram Mechanism
The ram drive of M2048TS/2044TS series has incorporated CFRP in the part of toggle mechanism connected directly to the servomotor making it lighter in weight and more rigid. The new drive mechanism and the replacement of the alternating movement decreases vibration by 65%. In addition, a reduction of motor heat saves energy in cooling and the resuscitation of electric energy when braking.

Energy Conservation & Low Running Cost
An environment-friendly eco-machine, Motorum uses the energy it needs only at the time of punching, thanks to the servo motor drive mechanism.

Brush Table
While reducing scratching on the back of the worksheet, the brush table also gives stable movement of the worksheet. The brush table reduces noise during worksheet movement and eliminate scratches to the back of worksheet.

Crash Sensor

Prevent major damage to the machine. Crash sensors stop the machine when material curves upward toward the turret preventing a collision.
Forming
Optimum control of RAM speed leads to fast and accurate forming of the highest quality, with minimal distortion of the workpiece.
Retractable forming die function (Option)
Upward forming tool dies are retracted out of the way of the work sheet movements when forming is not in operation to avoid interference of forming die with workpieces or workholders. This allows free fast movement of the sheet without any restrictions and improves quality.

Downward extrusion protection (Option)
Conventional turret punch presses have long had difficulty with downward extrusion. As the formed work is lifted off the upper surface of the die during table/sheet movement, this option eliminates degradation of the form stemming from interference with the die.

Deburring Operation
One tooling. All round deburring operation (Option)
Deburring and pinching operation using the ball bearing manufactured originally by Muratec. Two bearings from top and bottom sides removes the burr of the edge both sides, upper and lower, of the punched parts simultaneously by pinching the edge of the punched sheet along with the path.

Time Study

Main Specifications
Model | ![]() |
M2048TS | ![]() |
M2044TS | ||
---|---|---|---|---|---|---|
![]() |
||||||
Punching capacity | ![]() |
200 kN 20.4 Metric Tons 22.4 US Tons |
||||
![]() |
||||||
Maximum sheet thickness | ![]() |
6.35 mm (Steel ball table) | ||||
![]() |
||||||
Maximum sheet size punchable without repositioning (Y x X) |
![]() |
1250 mm x 2500 mm | ![]() |
1250 mm x 1250 mm | ||
![]() |
||||||
No. of Turret stations | ![]() |
44,54 | ||||
![]() |
||||||
Hit rate | ![]() |
![]() |
||||
![]() |
||||||
![]() |
![]() |
1.0 t 25 mm pitch 8.3 mm stroke |
![]() |
355 HPM | ||
![]() |
||||||
1.0 t 05 mm pitch 1.4 mm stroke |
![]() |
900 HPM | ||||
![]() |
||||||
Punching accuracy | ![]() |
± 0.1mm |
For your inquiry : Please consult your local Muratec sales networks for information regarding the products and services that may be available in your area.